Types Of Concrete Would Be Most Suitable For Construction Activities?

Types Of Concrete Would Be Most Suitable For Construction Activities?

For a long time, concrete is being used for construction activities. Different construction activities require different types of concrete. You can find many concrete manufacturers in NZ to hire them for you. First, let us discuss differently

types of concrete:

  • Plain Concrete
  • Normal-Strength Concrete
  • High-Strength Concrete
  • Rapid-Strength Concrete
  • High-Performance Concrete
  • Ultra-High-Performance Concrete
  • Reinforced Concrete
  • Ready Mix Concrete
  • Stamped Concrete
  • Precast Concrete

1) Plain Concrete

Bare concrete is the most straightforward kind of concrete, and the most commonly used mix is cement, aggregates, and water in the proportion 1:2:4. Mainly, Plain concrete is used to construct pavements, footpaths, and build areas that don’t require high tensile strength.

2) Normal-Strength Concrete

Typically, Normal strength is similar to bare concrete as the same types of material are used for the manufacture. There is an initial setting time of concrete, which is about 30 to 90 minutes and also depends on the properties of cement and weather conditions of cement.

3) High-Strength Concrete

High Strength concrete is usually prepared by decreasing the water-cement ratio to less than 0.35. Working with it is an issue because of its lower level of performance.

4) Rapid-Strength Concrete

As from the name, Rapid-strength concrete acquires its strength within a few hours of its preparation and makes it the best concrete for your building or construction. One of the most common uses of this concrete is for repairing roads.

5) High-Performance Concrete

This concrete is known for its high level of performance. It is considered best for construction because of its easy placement, high durability, and environmental concerns.

You can hire any concrete manufacturers in NZ, for any type of concrete.

6) Ultra-High-Performance Concrete

It requires silica fume, quartz flour, fine silica sand. The main advantage of this concrete is that it does not need steel rebars to reinforce the structure.

7) Reinforced Concrete

Bare concrete does not have high tensile strength; on the other side, reinforce concrete is in the form of steel rods, bars, meshes that can improve the overall strength of concrete. It is used to construct columns, ceilings, bridges, and other structures that require high-level power.

8) Ready Mix Concrete

Ready-mix concrete is mixed at the central mixing plant and brought to the construction ready-made or ready for use.

9) Stamped Concrete

Stamped concrete finds its usage in interior flooring, driveways, etc. This concrete allows creating realistic patterns such as real and natural stones, tiles, and granite using professional stamping pads.

10) Precast Concrete

Precast concrete is used to manufacture blocks, poles, lintels, precast walls, etc. The advantage of Precast Concrete is that it is manufactured according to specifications. The assembly of these units takes place at construction sites.

Which type of concrete will beneficial for you depends upon your requirements. Each type of concrete provides different kinds of stability and reliability. There are many concrete manufacturers in NZ: Allied concrete, atlas concrete, mix concrete, etc. Experienced ones are always best to consider advice on the type of concrete you require.

Leave a Reply

Your email address will not be published. Required fields are marked *